Kona Process 153 CR 27.5 2018
2018 Mountain
Estimate price |
4,799$
Bike details
Overview
Key information split into simple groups.
Bike summary
-
-
Frame Carbon -
Wheels 29" -
Travel Front 160mm -
Travel Rear 153mm -
Fork RockShox Lyrik
-
Groupset GX, Truvativ Descendant -
Suspension Full -
Drivetrain 1 × 12 -
Brakes Hydraulic Disc
Sizing
Recommended size guide.
SM
152cm - 170cm
MD
157cm - 182cm
LG
175cm - 195cm
XL
180cm - 195cm
Parts list
Components
Main components, grouped by system.
Bike components
Frame
Frame
Kona DH Carbon w/ 6061 Aluminum chain stays 153mm Travel
Suspension Fork
RockShox Lyrik Solo Air 160mm Tapered 110mm Spacing
Rear Shock
RockShox Deluxe RT Trunnion
Drivetrain
Rear Derailleur
SRAM GX-Eagle
Front Derailleur
n/a
Shift Levers
SRAM GX-Eagle
Cassette
SRAM GX-Eagle 10-50t 12spd
Crank
SRAM Descendant 6K, 34t X-Sync Eagle
Bottom Bracket
SRAM GXP PF92
Chain
SRAM GX-Eagle
Chain Guide
n/a
Pedals
n/a
Wheels
Front Hub
Formula 110x15mm
Rear Hub
Formula 148x12mm
Rims
WTB Asym i29 TCS
Spokes
Sandvik Stainless Black 14g
Tires
Maxxis Minion DHF EXO TR 3C 29x2.5"
Brakes
Brakes
SRAM Guide R
Brake Levers
SRAM Guide R
Disk Rotors
SRAM Centerline 200mm
Cockpit
Stem
Kona XC/BC 35
Handlebar
Kona XC/BC 35
Grips
Kona Key Grip
Headset
FSA Orbit 1.5 E ZS
Seat
Saddle
WTB Volt Comp
Seatpost
Rock Shox Reverb 31.6mm
Fit data
Geometry
Numbers for sizing and ride feel.
| Size | SM | MD | LG | XL |
|---|---|---|---|---|
| Stack Reach Ratio | 1.41 mm | 1.35 mm | 1.3 mm | 1.22 mm |
| Bottom Bracket Height | 348 mm | 348 mm | 348 mm | 348 mm |
| Front Center | 735 mm | 762 mm | 791 mm | 830 mm |
| Rake | 42 mm | 42 mm | 42 mm | 42 mm |
| Trail | 120 mm | 121 mm | 121 mm | 121 mm |
| Stack | 604 mm | 609 mm | 618 mm | 627 mm |
| Reach | 427 mm | 452 mm | 477 mm | 512 mm |
| Top Tube Length | 575 mm | 602 mm | 631 mm | 670 mm |
| Seat Tube Angle | 76 ° | 76 ° | 76 ° | 76 ° |
| Seat Tube Length | 385 mm | 410 mm | 450 mm | 485 mm |
| Head Tube Angle | 66 ° | 66 ° | 66 ° | 66 ° |
| Head Tube Length | 115 mm | 120 mm | 130 mm | 140 mm |
| Chainstay Length | 427 mm | 427 mm | 427 mm | 427 mm |
| Wheelbase | 1162 mm | 1189 mm | 1218 mm | 1257 mm |
| Bottom Bracket Drop | 10 mm | 10 mm | 10 mm | 10 mm |
| Standover Height | 707 mm | 706 mm | 706 mm | 705 mm |
| Wheels | 29" | 29" | 29" | 29" |
| Rider Min Height | 152 cm | 157 cm | 175 cm | 180 cm |
| Rider Max Height | 170 cm | 182 cm | 195 cm | 195 cm |
Model Overview
Process 153 CR 27.5 is a Kona Process 153 model. 42 bikes variations carry this model name so far. You can easily view all of the Kona Process 153 bikes models from 2018, here.
Model range prices
The most economical model, the Kona Process 153 SE 2018 has a starting price of 2199$. Kona Process 153 CR/DL 27.5 2018 on the other hand is the most expensive at 5999$.
Safety
When you go for a ride, don’t forget to put your helmet on. Moreover, ride with traffic, not against it. This will help you stay visible to drivers and also makes it easier for them to see you.
Average price for Enduro bikes
If you want an acceptable Enduro bike you should know that the average price is 3599$. However, even if your budget is less than the average, you might still be able to get a top-quality Enduro bike. As a general rule of thumb, you should always read reviews about the bike and its components before buying it to ensure you don’t pay too much.
When Kona released this model in 2018, its price was 4799$. Comparing this to the average Enduro bike price, we see that the price is 33.34% more expensive.
Process 153 CR 27.5 components
Fork
The Process 153 CR 27.5 comes factory-installed with the RockShox Lyrik fork. This has a travel range of 160mm. Bike forks are great for shock absorption and provide you with a smooth ride. In conclusion, always look for a fork with decent travel when you buy a bike.
Rear Shock
The shock that’s installed on this bike is RockShox Deluxe RT Trunnion, with a travel distance of 153mm. Bike rear shocks are a great way to increase comfort on the bike and give you more control when riding on technical trails. To sum up, always consider getting a bike that has a rear shock as well.
Wheels
When it comes to wheels, the Process 153 CR 27.5 bike is equipped with the 29″ aluminum model. These wheels are more forgiving when you go over roots, rocks, bumps, or other obstacles you encounter on your ride. However, these wheels are not ideal for smaller people.
Brakes
When you want to stop the bike in time, the brakes are vital. The Process 153 CR 27.5 has Hydraulic Disc brakes. Hydraulic disc brakes provide amazing stopping power, no matter what the terrain. To sum up, you can ride your bike with confidence.
Sizes
This bike is available in 4 sizes. They vary from 152 cm – 195 cm (4.99 ft – 6.4 ft). In short, you can easily find one that suits you.
Dropper post
Kona Process 153 CR 27.5 comes with a dropper post. Therefore, climbing or descending will be a breeze.